Common problems and solutions in the production of stainless steel metal signs

Writer：admin Time：2023-12-12 14:54 Browse：℃

　　Stainless steel metal signage, as a common identification product, is widely used in industries, construction, and transportation. Stainless steel material has advantages such as corrosion resistance, wear resistance, and high temperature resistance, which can maintain good appearance and performance for a long time. However, there are also some common problems in the production process of stainless steel metal signs. This article will introduce these issues and provide corresponding solutions.

　　Problem 1: Cutting stainless steel plates is prone to producing burrs

　　Solution:

　　1. Use professional stainless steel cutting machinery and ensure the sharpness of the cutting tools.

　　2. Adjust the cutting speed and cutting pressure to suit stainless steel plates of different thicknesses and hardness.

　　3. Add an appropriate amount of cooling lubricant during the cutting process to reduce frictional heat and reduce the possibility of burrs.

　　Problem 2: Scratches appear on the surface of the stainless steel nameplate

　　Solution:

　　1. During the production process, avoid contact with hard objects and try to place them on a flat and soft cushion for operation.

　　2. Use professional polishing equipment and grinding tools to treat the surface of the label and remove scratches.

　　3. Use specialized stainless steel care agents for cleaning and maintenance to increase the scratch resistance of the label surface.

      

　　Problem 3: Poor anti-corrosion performance of stainless steel signs

　　Solution:

　　1. Choose high-quality stainless steel materials, such as SUS304, 316, etc., which have better corrosion resistance.

　　2. Apply a layer of anti-corrosion paint or oil on the surface of stainless steel signs to enhance their anti-corrosion durability.

　　3. Regularly clean and maintain stainless steel signs to avoid accumulation of dirt and corrosion.

　　Problem 4: Unclear handwriting on stainless steel signs

　　Solution:

　　1. Choose a suitable engraving process and pay attention to the clarity and accuracy of the handwriting during the production process.

　　2. Use high-quality inkjet equipment and marking machines to ensure clear and visible handwriting.

　　3. Choose the appropriate font and size to avoid blurry or small fonts that may result in unclear handwriting.

　　Problem 5: Difficulty in installing stainless steel signs

　　Solution:

　　1. Plan the installation location and method in advance, and make suitable installation hole positions.

　　2. Choose appropriate installation tools and fasteners to ensure that the signage can be securely installed in the required position.

　　3. Pay attention to the flatness and levelness of the signs to avoid tilting or instability during installation.

　　By understanding the common problems and corresponding solutions in the production of these stainless steel metal signs, we can better ensure the quality and effectiveness of the signs. In the actual operation process, the most suitable solution should also be selected based on the specific situation, and the operation should be strictly carried out according to the label production standards to ensure the quality and reliability of the final product.